OuterControl 4x4

4x4 Mates CQ
 
HomeFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 having a go at putting a pic up

View previous topic View next topic Go down 
AuthorMessage
plumb
Moderator
avatar

Age : 47
Join date : 2010-04-10
Posts : 832

PostSubject: having a go at putting a pic up   Fri Nov 12, 2010 9:32 pm


holey sh$t i did it i'll keep playing with the size now
Back to top Go down
plumb
Moderator
avatar

Age : 47
Join date : 2010-04-10
Posts : 832

PostSubject: Re: having a go at putting a pic up   Fri Nov 12, 2010 9:40 pm

first one took up the whole screen then i did something that made it to small.I like this size what do you guys reckon lol
Back to top Go down
gqmad
member


Age : 39
Join date : 2010-01-31
Posts : 182

PostSubject: Re: having a go at putting a pic up   Sat Nov 13, 2010 6:30 am

I reckon thats the filthiest 80 series I've seen for quite a while. lol!
Back to top Go down
thedjs
member
avatar

Age : 47
Join date : 2010-10-15
Posts : 60

PostSubject: Re: having a go at putting a pic up   Sat Nov 13, 2010 10:59 pm

I remember that pic but from a different angle. Yeah that thing is dirty alright.
Here is another angle.

In this pic are a white 80 Series, a light red 80 Series and a blue Pajero, Who would have thought.
Back to top Go down
plumb
Moderator
avatar

Age : 47
Join date : 2010-04-10
Posts : 832

PostSubject: Re: having a go at putting a pic up   Sun Nov 14, 2010 11:48 pm

That was when i first got it and thought Quay St was fun.6hrs of hosing and scrubbing started to get a bit sour with me i so i avoid mud as much as possible now.
Back to top Go down
Deadly GU
Admin
avatar

Age : 47
Join date : 2010-01-31
Posts : 1148

PostSubject: Re: having a go at putting a pic up   Mon Nov 15, 2010 7:06 am

Buy a High Pressure water cleaner lol! lol!

Looked like a heap of fun Geoff cheers cheers

_________________
He who laughs last, also thinks the slowest!!!

'01 'Trol Wagon.....Tourer
'90 Nav.......Toy
Back to top Go down
gqmad
member


Age : 39
Join date : 2010-01-31
Posts : 182

PostSubject: Re: having a go at putting a pic up   Mon Nov 15, 2010 8:47 am

plumb wrote:
That was when i first got it and thought Quay St was fun.6hrs of hosing and scrubbing started to get a bit sour with me i so i avoid mud as much as possible now.

It still is fun, pulling out every other bugger that gets stuck can be a bit tiresome .

Dave is spot on grab a gurney it turns 6 hours cleaning into about 1. cheers
Back to top Go down
plumb
Moderator
avatar

Age : 47
Join date : 2010-04-10
Posts : 832

PostSubject: Re: having a go at putting a pic up   Tue Nov 16, 2010 8:24 pm

After the mud faze i discovered hill climbing and rocks etc(hense why i dont have the alloy bar and steps anymore Laughing )Also in that mud pic the flares were attached with factory fittings unlike they are now Embarassed
the side steps at the moment are just that.One day i will pull my finger out and modify them into sliders Twisted Evil Not thaqt i need them i only take the kids to soccer with it
Back to top Go down
Deadly GU
Admin
avatar

Age : 47
Join date : 2010-01-31
Posts : 1148

PostSubject: Re: having a go at putting a pic up   Tue Nov 16, 2010 9:39 pm

Come on Soccerdad, pull your finger out and get them sliders done. lol! lol! Dam saight cheaper then repairing sills Sad Sad

_________________
He who laughs last, also thinks the slowest!!!

'01 'Trol Wagon.....Tourer
'90 Nav.......Toy
Back to top Go down
plumb
Moderator
avatar

Age : 47
Join date : 2010-04-10
Posts : 832

PostSubject: Re: having a go at putting a pic up   Wed Nov 17, 2010 10:39 am

Its in the 10 yr plan lol
Back to top Go down
Reedy
Moderator
avatar

Age : 38
Join date : 2010-01-30
Posts : 435

PostSubject: Re: having a go at putting a pic up   Thu Nov 18, 2010 8:08 am

Hey Plumb I heard Dave is really really really good at building sliders!!!! You recon he would build ya some hey!!!!! Rolling Eyes

_________________
'98' Landcruiser Prado 2.7lt 4cyl Petrol

TURBO'S ARE GREAT..........BUT I'D RATHER BE BLOWN!!!
Back to top Go down
http://outercontrol4x4.forumotion.com
plumb
Moderator
avatar

Age : 47
Join date : 2010-04-10
Posts : 832

PostSubject: Re: having a go at putting a pic up   Thu Mar 10, 2011 8:56 pm

I changed the steering wheel a couple of weeks ago and it was out a few notches and didn't sit straight.Me being me i didn't pull it off and remedy it.But it is all good now though since i changed all the trailing arm bushes on the rear.Now that being the case i would assume that one side was worse than the other and my diff was crabbing,why else would the steering wheel be sitting straight now?
The old bushes were in there tight,the cracking and banging coming from the press was unreal(20 tonne press)Now i just gotta do the front i already have the correction bushes just need the 2 for the other end.You guys do them over there Reedy?
Back to top Go down
Deadly GU
Admin
avatar

Age : 47
Join date : 2010-01-31
Posts : 1148

PostSubject: Re: having a go at putting a pic up   Mon Mar 14, 2011 9:45 pm

Reedy wrote:
Hey Plumb I heard Dave is really really really good at building sliders!!!! You recon he would build ya some hey!!!!! Rolling Eyes
Yeh, I can build you a set ( did a set for an 80 a couple of yrs ago), prob even got enough steel lying around to do them scratch scratch
If your interested, let me know, can do a set for Finney at the same time cheers

_________________
He who laughs last, also thinks the slowest!!!

'01 'Trol Wagon.....Tourer
'90 Nav.......Toy


Last edited by Deadly GU on Mon Mar 14, 2011 9:48 pm; edited 1 time in total
Back to top Go down
Deadly GU
Admin
avatar

Age : 47
Join date : 2010-01-31
Posts : 1148

PostSubject: Re: having a go at putting a pic up   Mon Mar 14, 2011 9:46 pm

plumb wrote:
I changed the steering wheel a couple of weeks ago and it was out a few notches and didn't sit straight.Me being me i didn't pull it off and remedy it.But it is all good now though since i changed all the trailing arm bushes on the rear.Now that being the case i would assume that one side was worse than the other and my diff was crabbing,why else would the steering wheel be sitting straight now?
The old bushes were in there tight,the cracking and banging coming from the press was unreal(20 tonne press)Now i just gotta do the front i already have the correction bushes just need the 2 for the other end.You guys do them over there Reedy?

Thinking I might have to do the bushes in mine soon as well scratch scratch

_________________
He who laughs last, also thinks the slowest!!!

'01 'Trol Wagon.....Tourer
'90 Nav.......Toy
Back to top Go down
Reedy
Moderator
avatar

Age : 38
Join date : 2010-01-30
Posts : 435

PostSubject: Re: having a go at putting a pic up   Wed Mar 16, 2011 4:47 am

Yea we can do em Plumb, Bring em in next week!!!

_________________
'98' Landcruiser Prado 2.7lt 4cyl Petrol

TURBO'S ARE GREAT..........BUT I'D RATHER BE BLOWN!!!
Back to top Go down
http://outercontrol4x4.forumotion.com
Miss T
Admin
avatar

Age : 36
Join date : 2010-01-30
Posts : 271

PostSubject: Re: having a go at putting a pic up   Tue Apr 03, 2012 5:54 am

Here's some pics of your truck plumb. These are from the trip we did recently




_________________
What can I say I like Big things Razz
Back to top Go down
Miss T
Admin
avatar

Age : 36
Join date : 2010-01-30
Posts : 271

PostSubject: Re: having a go at putting a pic up   Tue Apr 03, 2012 5:57 am






_________________
What can I say I like Big things Razz
Back to top Go down
plumb
Moderator
avatar

Age : 47
Join date : 2010-04-10
Posts : 832

PostSubject: Re: having a go at putting a pic up   Thu Apr 05, 2012 11:22 am

Thanks Trud I was gunna ring you about those lol
Check out the rear wheel in pics 6 and 7
I can't understand why i break things scratch lol!
Back to top Go down
Sponsored content




PostSubject: Re: having a go at putting a pic up   

Back to top Go down
 
having a go at putting a pic up
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Good putting mat. Max 300cm x 80cm
» Which Chipping and Putting Range is OPEN TO PUBLIC for free?
» Putting a Satin Finish on Chrome Irons
» putting car in park while car was rolling
» 2 Points about putting down-lights in your van

Permissions in this forum:You cannot reply to topics in this forum
OuterControl 4x4 :: Members Rigs-
Jump to: